How to Connect Led Strip Lights to Music?
![](https://i4.ytimg.com/vi/YGMgJLEhiqY/sddefault.jpg)
Contents
Looking to add some extra flair to your home audio setup? Check out our guide on how to connect led strip lights to music! You’ll be able to create a custom light show that will add another dimension to your listening experience.
Introduction
An LED strip light is a flexible circuit board populated by surface-mounted light-emitting diodes (SMD LEDs) and other components that usually comes with an adhesive backing. A variety of SMD LEDs are available, including versions that emit light in different colors.
What You Will Need
In order to connect your LED strip lights to music, you will need:
-A sound activated controller
-An LED light strip
-A power supply
-Speakers
Follow the steps below to set up your system.
Step One: Choose Your Music
Before you can start syncing your LED light strip to music, you need to choose the right tunes. Ideally, you want to pick a song that has a good beat and a lot of variation. This will make it easier to find points in the song where the light show can change. You might also want to choose a song that is familiar to you so that you can anticipate when the changes will happen.
Step Two: Set Up Your Lights
Now that you have your music and lights, it’s time to set up your light show! If you’re using LED strip lights, we recommend starting with our LED light controller. This will allow you to control multiple strips of lights at once and change the color, brightness, and pattern of your lights with the click of a button.
First, unroll your LED strip light and make sure that the arrows on the arrows on the strip are pointing in the same direction. Next, cut off any excess strip light so that you have a tidy length that will reach from your power source to your music player.
If you’re using battery-operated lights, make sure to insert batteries into each light before proceeding. If you’re using mains-powered lights, plug each light into a nearby power outlet.
Now it’s time to connect your lights to your music player. If you’re using an LED controller, connect one end of your controller to your music player using a 3.5mm audio cable. Then connect the other end of your controller to your first light strip using another 3.5mm audio cable. Repeat this process for each additional light strip.
If you’re not using an LED controller, connect one end of your first light strip directly to your music player using a 3.5mm audio cable. Then connect the other end of that same light strip to the input of your second light strip. Repeat this process for each additional light strip until all of your lights are connected in a chain.
Step Three: Connect Your Lights to the Music
Now that you have your controller and power supply set up, it’s time to connect your lights to the music. This is a fairly simple process, but there are a few things you’ll need to keep in mind.
For starters, you’ll need to make sure that your controller is compatible with your lights. Most controllers will work with a variety of lights, but it’s always best to check before you make your purchase.
Once you’ve confirmed that your controller is compatible with your lights, you’ll need to connect the two. Most controllers will have a specific port for connecting to your lights. If you’re not sure which port to use, consult the instructions that came with your controller.
Once you’ve connected your controller to your lights, all that’s left to do is sit back and enjoy the show!
Step Four: Enjoy Your Music-Synced Lights!
Now that you have everything set up, it’s time to start enjoying your music-synced LED strip lights! Make sure your Bluetooth speakers are turned on and your LED strip lights are powered. Then, simply start playing your favorite tunes and watch as your LED strip lights flash and change colors in time with the music. You can use the controller to adjust the sensitivity of the lights so that they react exactly how you want them to.
With music-synced LED strip lights, you can create an amazing and unique ambiance in any room. Whether you’re hosting a party or just want to relax and enjoy your favorite tunes, these lights are a great way to add some fun and excitement to your décor.
Tips and Tricks
If you want to get the most out of your LED strip lights, then you need to know how to connect them to music. Here are some tips and tricks to help you get started:
1. Firstly, make sure that you have the right equipment. You will need an audio input device, such as a microphone or an external sound card, and an amplifier.
2. connect the audio input device to the amplifier.
3. Connect the amplifier to the LED strip light controller.
4. Make sure that the audio input device is turned on and that the volume is turned up so that the music can be heard clearly.
5. Enjoy your LED strip lights and create a great atmosphere for any occasion!
FAQs
Q: Do LED strips have to be connected to an amp?
A: No, LED strips do not have to be connected to an amplifier. However, if you are looking to create a more dynamic and custom lighting experience, connecting your LED strips to an amp can give you more control over the light output.
Q: Can I cut LED strip lights?
A: Yes, in most cases you can cut LED strip lights to size. However, it is important to check the manufacturer’s instructions before cutting, as some strips may not be able to be reconnected once cut.
Q: How do I connect LED strip lights to my music?
A: You can connect your LED strip lights to your music using a special controller that converts the audio signal into a signal that can be used by the LEDs. This type of controller is sometimes called an “audio-to-light converter” or “sound-activated controller.”
Conclusion
So, now that you know how to connect LED strip lights to music, you can enjoy LED lighting in your home that pulses and changes with the beat of your music. This is a great way to add some extra fun and excitement to any party or gathering. Just be sure to follow the instructions carefully so that you don’t damage your lights or injure yourself.
Further Reading
If you want to know how to connect LED strip lights to music, there are a few things you should know. First, LED strips are not polarity sensitive, meaning that the positive and negative leads can be swapped without damaging the LEDs. Second, most LED strips will come with a controller that allows you to change the light intensity, color, and pattern. Finally, when connecting your LED strips to an audio source, you will need to use a 3.5mm AUX cable or a 3.5mm-to-RCA adapter.
For more information on how to connect LED strip lights to music, check out this article from RadioShack.