How to Get a Bigger Sound From Your Kick When Recording Electronic Dance Music
Contents
In electronic dance music, the kick is one of the most important elements. A good kick can make or break a track. In this blog post, we’ll show you how to get a bigger sound from your kick when recording.
The role of the kick in electronic dance music
The kick is one of the most important elements in electronic dance music, providing the foundation for the entire track. A great kick can make all the difference in a track, giving it energy and driving it forward.
There are a few things to keep in mind when trying to get a big sound from your kick when recording. First, make sure the kick is placed in the right spot in the mix. It should be front and center, not buried in the mix. Second, use EQ to sculpt the perfect kick sound. Boost the low end to add weight, and use a high-pass filter to remove any unwanted frequencies. Finally, use compression to keep the kick sounding punchy and powerful. These tips will help you get a tight, punchy kick sound that will drive your tracks forward.
The three elements of kick sound
There are three elements to getting a big sound from your kick when recording Electronic Dance Music. The first is the right sound. The second is the right placement. The third is the right compression. Let’s go through each one of these in more detail.
To get the right sound, you need to use a kick sample that has a lot of low end. A lot of people use sub bass samples, but you can also use an 808 kick or even a synth bass patch. Just make sure that it has a lot of low end…
How to get a bigger sound from your kick
Whether you are just getting started with recording electronic dance music, or you are a seasoned pro, there are a few things you can do to get a bigger sound from your kick. In this article, we will go over some tips on how to get a bigger sound from your kick when recording electronic dance music.
The importance of EQ
In order to get a bigger sound from your kick, you will need to carefully EQ the sound. Start by boosting the low end frequencies around 80 Hz. Then, boost the mid-range frequencies around 1-3 kHz. Finally, add some presence around 5-7 kHz. Be careful not to overdo it with the EQ, as this can make the kick sound harsh and artificial.
The importance of compression
In order to get a big sound from your kick, it is important to use compression. By compressing the signal, you are able to increase the overall level of the signal which will make the kick sound bigger. Additionally, compression can help to even out the signal so that the kick is not too loud or too quiet in relation to the other instruments in the mix.
The importance of layering
In music production, layering is the process of combining multiple sounds together to create a more complex and full sound. It’s a common technique in all genres, but it’s especially important in electronic dance music (EDM) where the sound of the kick drum is often the most important element in the track.
There are a few different ways to layer sounds, but the most common method is to combine multiple kick drums together. This can be done by using different kicks from different drum machines or sampled libraries, or by recording multiple takes of the same kick with different microphones.
layering is a great way to add depth and power to your kick drums, but it’s important to use layering judiciously. Too many layers can make your kick sound muddy and over-produced, so it’s generally best to start with two or three layers and then add more if needed.
When layering kicks, it’s also important to pay attention to the phase relationship between the different sounds. If two kicks are out of phase with each other, they can cancel each other out and actually decrease the overall level of the kick. To avoid this, you can use a plug-in like iZotope Ozone 8’s Imaging module to visualize the phase relationship between your layers and make sure they’re in phase with each other.
